RK3588 COM Express Type 6 Module, WF-RK3588-S8, AndroidSBC, Sao Paulo

TL;DR: RK3588 COM Express Type 6 Module

Sao Paulo, Brazil - September 11, 2026. Wanlin Longgang confirmed lot 129 this week: 10,510 WF-RK3588-S8 boards for Sao Paulo, Brazil, released with the per-lot certification pack and a unit-level burn-in record.

AndroidSBC manufacturer capacity statement from the WF-RK3588 NPU production base serving Sao Paulo, Brazil. One Rockchip RK3588 silicon, nine application variants. The WF-RK3588 line covers edge AI inference, machine vision, robotics, AI NVR, cockpit, 8K signage, kiosk, ARM PC and custom SMARC carrier board work, all built on the same octa-core 8nm platform with 6 TOPS NPU and 8K H.265 video. Every board leaves the Wanlin Longgang plant with a per-lot certification pack and a burn-in record traceable by unit barcode. Buyers in Sao Paulo and Brazil can mix variants inside a single framework agreement.

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group. The group runs SMT, test and packing under one roof at Longgang in Shenzhen, and it has built boards on Rockchip silicon for overseas OEM customers for over ten years. The WF-RK3588 line-up covers nine deployment categories on the same Rockchip RK3588 octa-core 8nm silicon with 6 TOPS NPU: edge AI inference, industrial machine vision, robotics, AI NVR with analytics, smart cockpit, 8K signage, kiosk and POS, ARM PC and mini-PC, plus a SMARC 2.2 SOM. Buyers in Sao Paulo and Brazil can source any of the nine variants from one factory with one set of export documents.

WF-RK3588-S8 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588-S8 (SMARC 2.2 SOM and Custom Carrier Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Brazil importers sourcing the WF-Series, the 8GB + 64GB SMARC 2.2 (WF-RK3588-S8-A) variant is the typical configuration for the SMARC 2.2 module and custom carrier integration use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing SMARC 2.2 SOM and Custom Carrier Board for Brazil Buyers

Buyers in Sao Paulo who have sourced a smarc 2.2 som and custom carrier board for a few seasons tend to separate two questions: can the factory hold the price, and can it hold the allocation. The second one is harder. The Rockchip RK3588 is allocated at wafer level, and a 10,510-unit order placed against trader stock is the order most likely to slip a quarter without anyone warning the buyer. The second issue is firmware, not hardware. Vendors promise the full certified software stack and then ship a bare AOSP image, and the failure only surfaces at the warehouse when the unit is powered on against the customer's app.

The third item is the certification file. A marking without a dated test report is a placeholder, and placeholder paperwork is what turns a routine Brazil clearance into a three-week hold. The answer AndroidSBC applies is to close the gap at the source. Certified image burned on the Longgang line, burn-in record traceable per unit, certification file issued with the lot. The nine WF-RK3588 variants span SMARC 2.2 module, COM Express Type 6 builds, edge AI boxes, video wall controllers, medical imaging terminals, autonomous vehicle compute, bespoke industrial carriers, robotics SMARC compute, and AI NVR SMARC design and each carries three memory configurations, which keeps most Brazil requirements on a standard SKU rather than a custom run.

Brazil importers usually raise compliance first. In Brazil ANATEL homologation is a precondition for customs release, and the homologation holder is normally a local legal entity separate from the overseas manufacturer. AndroidSBC answers it by preparing the ANATEL homologation with INMETRO safety conformity documentation for ANATEL before the lot is packed, issuing it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and routing the lot through Port of Santos on the Santos to Shanghai lane.

Competitive Comparison: WF-RK3588-S8 vs Competing RK3588 Boards

Three groups of board compete for the smarc 2.2 som and custom carrier board socket. The first is Cortex-A53 silicon sold on price with no NPU and no certification file. The second is Cortex-A55 hardware that carries a 1 to 2 TOPS NPU but caps the decoder early. The third holds a 6 TOPS triple-core NPU, 8K H.265 video and treats expansion as part of the design. The WF-RK3588-S8 sits in the third group, and the separation comes from Rockchip RK3588, from NPU throughput that holds under a continuous loop, and from the certified image burned per lot at Longgang.

• vs proprietary SOM pin-outs: the SMARC 2.2 standard lets the carrier survive a module generation change without a re-layout.
• vs RK3568 SMARC modules: the WF-RK3588-S8 adds 8K@60fps decode, PCIe 3.0 x4, and 6 TOPS NPU on the same 314-pin edge.
• vs x86 COM Express modules: the WF-RK3588-S8 runs Android natively, which removes the OS licensing line from the BOM.
• vs module-only vendors: AndroidSBC ships the carrier reference design plus the signal integrity report with the module.

Global SMARC 2.2 Module and Custom Carrier Engineering Market Trends

The SMARC 2.2 Module and Custom Carrier Engineering market is the frame that decides how Brazil importers time their smarc 2.2 som and custom carrier board orders. The figure most Brazil buyers quote when they argue about allocation is the Edge AI hardware segment, which MarketsandMarkets sizes at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030); it is the public proxy for AI accelerator silicon demand rather than a forecast for this board category. For Sao Paulo, three buying patterns are shaping the WF-RK3588 order book:

• SMARC 2.2 module design: WF-RK3588-S8 seats on the 314-pin MXM edge with the carrier holding the I/O.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588-S8 board carries that headroom without a board change.
• Edge AI boxes: WF-RK3588-S8 runs 6 TOPS NPU inference on the carrier-side thermal solution.

Channel research on the SMARC 2.2 Module and Custom Carrier Engineering segment keeps landing on the same point: the constraint is allocation, and allocation is held by factories rather than traders.

The common thread for Brazil is that single orders are giving way to blanket agreements released monthly, which is what a twelve-month edge AI or machine vision programme needs in order to avoid a gap in the middle of the year.

Partner Success Story: Meridian Imaging in Sao Paulo, Brazil

Meridian Imaging, a medical imaging equipment maker serving the Brazil market, deployed 3,300 units of the WF-RK3588-S8 SMARC 2.2 module for an imaging terminal programme. The rollout covered the smarc 2.2 module design, edge ai boxes, and autonomous vehicle compute workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,300 units of the WF-RK3588-S8 SMARC 2.2 module for an imaging terminal programme
• Region: Sao Paulo, Brazil
• Models used: WF-RK3588-S8 (lead SKU), plus eight sibling WF-RK3588 NPU variants in the same chassis family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Ningbo-Zhoushan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Santos via the Santos to Shanghai lane

"The SMARC 2.2 pin-out on the WF-RK3588-S8 is the reason we chose the module. When the next silicon generation lands we can swap the module and keep the carrier, and the regulatory file stays largely intact."

- Dr. Alan Whitmore, VP Engineering

Field Report: burn-in room at the Wanlin Longgang plant running a 72-hour continuous loop on 10,510 units of the WF-RK3588-S8 board, with rack-wide output monitored by an automatic pattern checker

Reporter Chen Gang, on the ground in Sao Paulo, Brazil. The burn-in room runs pattern generators that alternate between HDR10 and HLG material. Each WF-RK3588-S8 unit carries a barcode tracked across the full 72-hour loop, and the rack controller issues a remote reboot whenever a unit shows an intermittent response on the I/O header.

The engineering desk ran a firmware re-flash drill on three units to confirm the recovery path a field technician would use.

The inspection confirmed three things on the spot: the WF-RK3588-S8 units hold the burn-in with a yield above 99.18 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering ANATEL homologation with INMETRO safety conformity administered by ANATEL, cleared for entry at Port of Santos on the Santos to Shanghai lane. Wanlin remains one of the few source factories currently shipping a nine-variant Rockchip RK3588 NPU computing line with a per-lot paper trail that Brazil importers can hand straight to their customs broker.

Filed by Chen Gang, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3588-S8 Application Scenarios

The WF-RK3588 line fits nine NPU application lanes, with the WF-RK3588-S8 (SMARC 2.2 SOM and Custom Carrier Board) as the lead SKU for Sao Paulo and Brazil programmes:

• SMARC 2.2 module design: WF-RK3588-S8 seats on the 314-pin MXM edge with the carrier holding the I/O.
• COM Express Type 6 builds: WF-RK3588-S8 maps to the Type 6 pin-out for existing x86 carriers.
• Edge AI boxes: WF-RK3588-S8 runs 6 TOPS NPU inference on the carrier-side thermal solution.
• Video wall controllers: WF-RK3588-S8 drives HDMI 2.1 and DP 1.4 out through the carrier.
• Medical imaging terminals: WF-RK3588-S8 pairs PCIe 3.0 x4 with the carrier frame grabber.
• Autonomous vehicle compute: WF-RK3588-S8 holds -40C to 85C on the automotive-grade carrier.
• Bespoke industrial carriers: WF-RK3588-S8 ships the signal integrity report for the customer stack-up.
• Carrier bring-up: WF-RK3588-S8 comes with the BSP port for the carrier revision.

Partnership Models for Sao Paulo Buyers

AndroidSBC runs three engagement tiers for Brazil importers and brand owners sourcing a smarc 2.2 som and custom carrier board on the WF-RK3588 line:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Every tier draws on the same Longgang line and the same certification desk. A Sao Paulo first order on the WF-RK3588-S8 normally lands on the 8GB + 64GB SMARC 2.2 (WF-RK3588-S8-A) configuration at MOQ 5,000 units per shipment, with samples in four weeks and production in six.

Frequently Asked Questions

Does the WF-RK3588 line run Android or Linux, and what NPU framework stack is supported?

Answer: Android 12 and Android 13 are prebuilt and signed at the factory for every WF-RK3588 variant; Android 14 is on the validation roadmap. On the Linux side the partner can choose Ubuntu 22.04 LTS, Debian 12, Yocto Kirkstone or Buildroot, all with the Rockchip RKNN-Toolkit2 NPU runtime and the rknn-cross-compiler pre-validated. The implication for a Brazil integrator is one silicon across both a certified Android stack on the WF-RK3588-K6 and a Linux NPU inference stack on the WF-RK3588-V1, drawn from the same supplier file.

What is the 6 TOPS triple-core NPU on the WF-RK3588 actually used for in production?

Answer: Three workload families, same silicon. Retail analytics on the WF-RK3588-E0, machine-vision defect classification on the WF-RK3588-V1, and 16-channel AI surveillance analytics on the WF-RK3588-N3. The same 6 TOPS triple-core NPU handles all three from a per-lot certified image burned at Longgang. Sao Paulo integrators typically pick one workload per variant and let AndroidSBC tune the firmware profile before shipment.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, REACH and IEC 62368-1 paperwork for Brazil?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports (EN 55032 plus EN 55035 EMC, EN IEC 62368-1 safety), the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a Brazil market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order on the WF-RK3588?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a Brazil partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept variant-mixed purchase orders.

Does AndroidSBC support custom Android ROM, custom Linux, or custom NPU model porting?

Answer: Custom ROM, custom Linux, and custom NPU model porting are all part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Ubuntu, Debian, Yocto or Buildroot images, BSP ports for custom carriers, and RKNN-Toolkit2 model quantization from PyTorch, ONNX, TensorFlow or Caffe. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support on the WF-RK3588?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-RK3588 line. Security patches are back-ported across the Android, Ubuntu LTS, Debian LTS and Yocto tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. NPU model builds are versioned on the Wanlin side so a partner that re-trains a model can push the new RKNN file through the same OTA channel without a board swap.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton labelling and pallet configuration are set up for FBA inbound requirements, the export declaration names the Wanlin Longgang source factory as the place of origin, and each pallet carries a per-unit barcode that traces back to the burn-in record for downstream RMAs.

How does AndroidSBC handle RMA or DOA replacements on the WF-RK3588?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3588-S8 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-RK3588-S8 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-RK3588. Sao Paulo and Brazil importers, brand owners and distributors who want the smarc 2.2 som and custom carrier board direct from the Longgang plant can reach the export desk at:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: ANATEL homologation with INMETRO safety conformity for Brazil, administered by ANATEL, entering at Port of Santos on the Santos to Shanghai lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For an OEM or ODM conversation, it helps to state the target annual volume, the certification scope required (CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, UL 60950-1 or EN 55032 plus EN 55035), and the preferred Incoterm (FOB Yantian, FOB Shekou, CIF, DDP, or DDP-Amazon). The export team returns a per-lot quote plus the variant-by-variant MOQ matrix for the WF-RK3588 line within two business days.