TL;DR: Payment Terminal Board for South Africa with Android 12
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
AndroidSBC, the export arm of Wanlin Manufacturing Group, treats the WF-SPT family as a long-lived platform rather than a one-off design. For international market and Brazil partners that means the same connector map, the same printer pinout and the same firmware window across every configuration in the range. Firmware is treated as a managed asset on this family. Brazil estates receive staged OTA groups with rollback, signed images and a published maintenance window, so a international market operations team can schedule an update rather than react to one.
WF-SPT-11 Technical Specifications
| Parameter | AndroidSBC WF-SPT-11 (multimedia payment terminal build with customer screen) | Industry Average |
|---|---|---|
| Processor | H618 quad-core ARM Cortex-A53 1.5GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-G31 MP2 | Older Mali-400 or basic 2D GPU |
| Memory | 4GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 32GB eMMC plus TF card up to 128GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 6-inch 1080x1920 MIPI DSI plus HDMI 2.0a customer screen output with 10-point capacitive touch with glove support | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | NFC contactless, IC card and QR with barcode scan engine header | Camera-only QR capture with no scan engine |
| Printer and peripherals | 80mm thermal printer header with 150mm per second output | No printer control header on competing boards |
| Wireless and positioning | dual-band WiFi 802.11 a/b/g/n/ac/ax with Bluetooth 5.0 | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 HDMI out, 1 USB Type-C host and OTG, 1 USB host, 1 RS232, 6 GPIO, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 12 with AOSP baseline and optional GMS | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC input with 5V/3A peripheral rail, dual-cell RTC and watchdog, -10C to 50C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-11 (multimedia payment terminal build with customer screen) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Brazil importers sourcing the WF-SPT family, the WF-SPT-11-A variant is the typical configuration for the cinema, stadium and theme park ticketing counters use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for Brazil Buyers
Most international market programmes are multi-format from the start: one countertop build for staffed lanes, one unattended build for kiosks, one outdoor build for forecourts. Buying those from three suppliers means three Android baselines and three sets of spare parts.
The second problem is paperwork. A Brazil shipment needs ANATEL homologation with INMETRO safety conformity documentation that matches the actual configuration on the pallet, not a generic file copied from an older lot, and the international market customs broker is the one who pays when it does not. AndroidSBC answers those problems with the WF-SPT family: twelve configurations, one fixed bill of materials per production lot, the compliance set bundled with the first carton, and a 7th production slot released this month for international market on the Santos - Shanghai CNSHA lane.
Competitive Comparison: WF-SPT-11 vs Competing Smart Payment Terminal Motherboards
For international market buyers the honest comparison is total cost of integration, not unit price. A cheaper board without a printer profile, a scan mapping or an OTA path costs more by the time the estate is live in Brazil.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Brazil integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
Demand in Brazil is moving toward unattended and self-service formats, and that shift changes what an multimedia payment terminal build with customer screen has to prove: an offline transaction buffer, a watchdog that recovers without a human, and a printer that survives a roll of receipts per day in international market.
- Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-05 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
For international market buyers the reading is straightforward: the growth is in formats, not in replacements, so the board that wins is the one that can be qualified once and then repeated across a Brazil estate.
WF-SPT-11 Application Scenarios
The WF-SPT-11 multimedia payment terminal build with customer screen sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-11-A configuration is the typical build for the cinema, stadium and theme park ticketing counters use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-03 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for international market Buyers
For international market partners the choice is between stocking the board, integrating the board or branding the board, and each track carries a different level of engineering support.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
All three tracks ship from the same source factory with the same compliance file, which is why international market partners can move between them as a Brazil programme grows.
Frequently Asked Questions
Does the smart payment terminal board family support a multimedia payment terminal build with customer screen?
Answer: Yes. The multimedia payment terminal build with customer screen ships as a standard configuration, qualified on the Longgang bench with the printer mechanism, the reader antenna and the scan engine that the international market integrator will install.
Which configurations are available in the WF-SPT family for Brazil buyers?
Answer: Twelve configurations span Rockchip H618 and the rest of the range: RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527, all on one peripheral contract.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. One WF-SPT board drives the touch panel, the thermal printer and the scan engine simultaneously, and the current budget for all three is measured on the bench and written into the shipment file.
What payment scheme certification support does AndroidSBC provide for Brazil?
Answer: The compliance file for Brazil covers ANATEL homologation with INMETRO safety conformity testing and ANATEL conformity, issued against the exact configuration that ships to international market rather than a generic family file.
What is the minimum order quantity and the sample lead time for Brazil?
Answer: The minimum for a customised build is higher than for a stock configuration, but a international market buyer can start with a sample lot, qualify it on the bench, and then move to a production slot without re-qualification.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. The engineering team supports driver development, API integration, locale packs and application pre-install, and the resulting image is signed and staged into OTA groups for international market.
How are firmware updates delivered to a Brazil device estate after deployment?
Answer: Firmware is delivered as signed images through staged OTA groups with rollback, so a Brazil estate can be updated in waves rather than all at once, with a published maintenance window.
What shipping terms does AndroidSBC support for Brazil orders?
Answer: AndroidSBC supports EXW, FOB, CIF and DAP, quotes Port of Santos as the default port for Brazil, and prepares the customs file before the container closes for international market.
Contact AndroidSBC: Start Your WF-SPT-11 Sourcing Conversation
Every international market programme starts the same way at AndroidSBC: the format, the peripherals, the certification calendar, then a quotation that holds the configuration for the term.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
OEM, ODM and private-label tracks are open for Brazil. AndroidSBC supplies the board, the firmware, the documentation and the qualification support, and international market partners own the channel.
