RK3588 Custom Carrier Board Design, WF-C3588-E7, AndroidSBC, Sao Paulo

TL;DR: RK3588 Custom Carrier Board Design

SHENZHEN, China, September 12, 2026 - Wanlin Manufacturing Group pushed lot 175 of the WF-C3588-E7 board out of the Longgang plant this week, 35,595 units for Sao Paulo, Brazil, with the export declaration naming Longgang as the place of origin.

AndroidSBC site report from running WF-C3588 custom motherboard installations serving Sao Paulo, Brazil. AndroidSBC is releasing the full WF-C3588 custom motherboard line for Sao Paulo and Brazil: nine variants built on the Rockchip RK3588 octa-core 6 TOPS NPU platform, covering custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. The line ships from the Wanlin Longgang facility with OEM branding, ODM carrier work, and per-lot CE, FCC, UKCA, RoHS and IEC 62368-1 documentation handled in-house.

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade building custom OEM and ODM boards on Rockchip silicon. The line this release covers is the WF-C3588: nine custom motherboard variants built on the same Rockchip RK3588 octa-core 8nm platform with 6 TOPS NPU and 8K H.265 video, covering custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant in Shenzhen builds the WF-C3588 for Brazil OEM, integrator and distributor programmes. For a Sao Paulo buyer the practical value of the line is that one silicon and one supplier file cover nine custom categories.

WF-C3588-E7 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-E7 (Custom Edge AI Computing Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Brazil importers sourcing the WF-Series, the 16GB + 64GB (WF-C3588-E7-C) variant is the typical configuration for the custom edge AI computing programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Edge AI Computing Board for Brazil Buyers

The custom edge ai computing board sourcing question that Sao Paulo distributors keep coming back to is continuity across quarters. The Rockchip RK3588 requires a dedicated wafer slot, and a 35,595-unit order placed against broker inventory often turns into a two-month slip with no warning. Then comes the software layer. A board that boots is not a board that holds a certified stack under a 72-hour loop, and Brazil buyers typically find the difference in their own warehouse rather than at the factory.

The third exposure is paperwork. Factories that stamp marks without holding the underlying test reports leave the importer to produce a Technical File after the fact, which is exactly when the container is sitting in a bonded yard. AndroidSBC runs the custom board build, the certified image burn, the burn-in record and the certification file inside the Longgang plant, so the lot arrives complete rather than in pieces. The nine variants in the WF-C3588 cover edge AI inference boxes, AI gateways, machine vision inspection, video analytics appliances, smart city nodes, factory AI retrofits, and edge computing servers and each one carries three memory configurations, which keeps Sao Paulo and Brazil buyers on standard custom SKUs for most requirements.

For Brazil specifically, the file travels with the goods. In Brazil ANATEL homologation is a precondition for customs release, and the homologation holder is normally a local legal entity separate from the overseas manufacturer. AndroidSBC prepares the ANATEL homologation with INMETRO safety conformity documentation for ANATEL, attaches the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and consigns the lot to Port of Santos on the Santos to Shanghai lane.

Competitive Comparison: WF-C3588-E7 vs Competing RK3588 Boards

Three families of board chase the same custom edge ai computing board socket. The first is catalogue hardware with fixed memory and fixed I/O, the second is re-badged stock where nobody owns the schematic, and the third is a real custom platform built by the factory that runs the SMT line. The WF-C3588-E7 belongs to the third family and separates itself on Rockchip RK3588, on customization depth from schematic to firmware, and on a certified image burned per lot.

• vs GPU entry servers: the WF-C3588-E7 runs multi-model INT8 pipelines at a fraction of the power, which is what makes an unattended edge cabinet viable.
• vs cloud-analytics appliances: inference stays local on the 6 TOPS NPU, so the site keeps running when the uplink does not.
• vs NPU-less gateways: the board replaces the gateway plus a separate vision box with one SKU and one firmware line.
• vs assembled white boxes: Longgang validates the NPU runtime, the thermal profile and the appliance chassis together before the lot ships.

Global Custom Edge AI Computing Board Market Trends

Buyers in Sao Paulo are reading the Custom Edge AI Computing Board curve before they commit to a custom edge ai computing board programme. MarketsandMarkets reports the Edge AI hardware segment at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, 2025-2030), used here as the RK3588-class silicon baseline rather than as a number for this category. That baseline breaks into three practical demand patterns for the WF-C3588 in Brazil:

• Retail analytics box: a mall operator counts dwell time and demographics locally across hundreds of fanless nodes.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-E7 board carries that headroom without a board change.
• Smart city intersection: a traffic programme runs vehicle and pedestrian analytics on one sealed node per junction.

What the Custom Edge AI Computing Board data does not show is the operational cost of a supply break, which is why Sao Paulo buyers increasingly weight supplier continuity above a marginal price difference.

The common thread in Brazil is that single orders are being replaced by blanket agreements with a monthly release, because a custom board programme that has to survive a twelve-month window cannot absorb an allocation gap in the middle of it.

Partner Success Story: Novara Interactive in Sao Paulo, Brazil

Novara Interactive, an education display brand serving the Brazil market, deployed 6,900 custom WF-C3588-S3 interactive whiteboard boards for a district rollout. The rollout covered the retail analytics box, smart city intersection, and healthcare kiosk analytics workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 6,900 custom WF-C3588-S3 interactive whiteboard boards for a district rollout
• Region: Sao Paulo, Brazil
• Models used: WF-C3588-E7 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Yantian with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Santos via the Santos to Shanghai lane

"EDLA certification and a classroom launcher were both factory deliverables. The touch panel routing was custom, the boot animation is ours, and eight hundred classrooms enrolled against the MDM in the first fortnight."

- Elise Tremblay, Head of Hardware

Field Report: burn-in room at the Wanlin Longgang plant running a 72-hour continuous loop on 35,595 units of the WF-C3588-E7 board, with rack-wide output monitored by an automatic pattern checker

Reporter Sun Ming, on the ground in Sao Paulo, Brazil. The burn-in room runs pattern generators that alternate between HDR10 and HLG material. Each WF-C3588-E7 unit carries a barcode tracked across the full 72-hour loop, and the rack controller issues a remote reboot whenever a unit shows an intermittent response on the I/O header.

Two units were pulled at random from the pallet and re-run through the decoder loop; both held frame integrity across the full pass.

The inspection confirmed three things on the spot: the WF-C3588-E7 units hold the burn-in with a yield above 98.72 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering ANATEL homologation with INMETRO safety conformity administered by ANATEL, cleared for entry at Port of Santos on the Santos to Shanghai lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Brazil importers can hand straight to their customs broker.

Filed by Sun Ming, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-E7 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-E7 (Custom Edge AI Computing Board) as the lead SKU for Sao Paulo and Brazil programmes:

• Retail analytics box: a mall operator counts dwell time and demographics locally across hundreds of fanless nodes.
• Factory vision retrofit: an assembly line adds defect classification without touching the PLC, using the multi-model pipeline.
• Smart city intersection: a traffic programme runs vehicle and pedestrian analytics on one sealed node per junction.
• Power grid substation: a utility reads gauges and thermal cameras locally over dual GbE back to the SCADA room.
• Agriculture edge node: a farm runs crop and pest models offline where connectivity is seasonal at best.
• Healthcare kiosk analytics: a clinic chain triages queues with on-device vision and no personal data leaving the site.
• Campus safety system: a university estate runs perimeter and corridor analytics with local alarm relay.
• Transit hub appliance: a station operator streams platform analytics to a control room over the optional 5G seat.

Partnership Models for Sao Paulo Buyers

For Sao Paulo distributors and brand owners, AndroidSBC opens the custom edge ai computing board line under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a Brazil partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-C3588-E7 is the 16GB + 64GB (WF-C3588-E7-C) configuration at MOQ 5,000 units per shipment, 1-3 days to sample and 15-30 days to mass production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Everything from the copper up. Custom PCB and PCBA, custom I/O routing, custom memory and storage configuration, custom display and camera interfaces, custom thermal profile from commercial to -40C to 85C industrial, and custom branding including silk-printed logo, packaging, SKU label and boot animation. The firmware side covers custom Android (GMS or AOSP), Ubuntu, Debian, Yocto and OpenHarmony builds with BSP ports handled by the Longgang engineering desk rather than handed to the buyer as an unmodified vendor drop.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Custom ROM, custom BSP and custom SDK work are all part of the ODM tier. AndroidSBC builds the Android image (12, 13, 14 or 15, GMS or AOSP), ports the Linux BSP to your carrier revision, and releases the SDK modules your team needs under NDA. The engineering desk carries the port itself, so a Brazil integrator is not left debugging an unmodified vendor BSP against a carrier it was never designed for.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. The RK3588 NPU runs INT4, INT8, INT16, FP16, BF16 and TF32, and AndroidSBC supports model deployment through the Rockchip RKNN-Toolkit2, with quantization from PyTorch, ONNX, TensorFlow, Caffe and MXNet. As part of the ODM tier, the engineering desk walks your model from framework to RKNN format and validates it on the actual board configuration you are shipping, not a reference unit. Model files are versioned so a retrained model can be pushed to field units through OTA without a board swap.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: The structure is deliberately two-speed: 1-3 days for a standard-variant sample so a Brazil project team can start immediately, and 15-30 days to mass production on a custom run once the design freezes. MOQ is 5,000 units per shipment on standard variants, with custom and pilot quantities negotiated against the annual volume commitment.

What certifications does a custom board need for Brazil, and who handles them?

Answer: Certification is part of the customization scope, not an afterthought. The in-house file covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated inside twelve months, plus GMS and EDLA tracks for custom Android and display products. The file is built for the exact configuration you ship, which matters for a custom board because a test report on a different memory fit is not a valid report at all.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum, written into the framework agreement. The RK3588 platform carries a long industrial lifecycle, and Wanlin commits to the supply window, to security patches across the Android, Ubuntu LTS, Debian LTS and Yocto tracks, and to OTA update infrastructure for field-deployed units. For a custom board that is the whole point of going to a source factory: the product lifecycle is a contract term, not a hope.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-C3588-E7 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in and configuration record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-C3588-E7 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-C3588 custom board line. Buyers in Sao Paulo and Brazil looking to source the WF-C3588-E7 straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: ANATEL homologation with INMETRO safety conformity for Brazil, administered by ANATEL, entering at Port of Santos on the Santos to Shanghai lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, customization scope and Incoterm. Provide those and a per-lot quote plus the WF-C3588 MOQ matrix comes back within two business days.