RK3568 POS Board with LVDS EDP MIPI for Restaurant Till, WF-P3601, AndroidSBC, Sao Paulo

TL;DR: RK3568 POS Board with LVDS EDP MIPI for Restaurant Till

AndroidSBC release: twelve-model WF-P POS motherboard family opens for volume orders serving Sao Paulo, Brazil. The WF-P3601 POS Android motherboard spans the all-in-one POS terminal with receipt printer and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, eDP plus HDMI output at 4K@60Hz, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Sao Paulo and Brazil importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

The twelve WF-P models share a single peripheral interface contract. A Brazil distributor who starts on the RK3568 dual-screen tier for a convenience chain can step up to the RK3576 AI tier for a face payment project without changing the printer connector, the touch controller or the OTA workflow. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Brazil, bundled with the lot so the importer clears customs without a second round of test reports.

WF-P3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3601 (all-in-one POS terminal with receipt printer) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Brazil importers sourcing the WF-P family, the WF-P3601-A variant is the typical configuration for the boutique retail all-in-one checkout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Brazil Buyers

POS counters punish hardware in a way that office equipment never does. Grease, steam, spilled drink, a drawer slammed shut ten thousand times a month, and a mains supply that dips every afternoon - the Brazil rollout fails on those details long before it fails on CPU benchmarks.

For Sao Paulo integrators worried about the trading-company risk, AndroidSBC ships from the same building the boards are built in. The source factory address is on the packing list, the test record carries a serial number, and the ANATEL homologation with INMETRO safety conformity route used in Brazil is issued against that factory, not against a reseller. The 7th release for Sao Paulo - 22800 units on September 23, 2026, Santos - Shanghai CNSHA lane - was built against the same reference image the partner qualified, so the lanes went live without a re-test cycle.

Competitive Comparison: WF-P3601 vs Competing POS Android Boards

Competing boards reaching Sao Paulo usually win on unit price and lose on everything that happens after the first container. The four points below are where that shows up.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Two forces drive the Brazil POS hardware cycle. The first is the shift to contactless and wallet payments, which pushes the NFC reader and the payment kernel onto the board itself. The second is the regulatory floor - EMV, PCI DSS and national fiscal rules - which forces an upgrade on a timetable the merchant does not control.

• Entry counter tier: WF-P3601 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3602 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P3566 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

For Sao Paulo buyers the reading is straightforward: the market is growing on replacement, not on first-time installation, so the board that wins is the one that fits the enclosure already on the counter.

Partner Success Story: Loire Comptoir Numerique (boutique retail POS integrator)

A Loire Comptoir Numerique programme in the French specialty retail segment illustrates how the WF-P family from AndroidSBC supports Sao Paulo integrators on the ground. Loire Comptoir Numerique installed 22800 WF-P boards across 45 boutique counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Loire Comptoir Numerique branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANATEL conformity, all bundled into the Shenzhen source-factory shipment.

Loire Comptoir Numerique Director of Systems for French Specialty Retail highlighted: Loire Comptoir Numerique needed the fiscal log retention behaviour documented for the French audit, and 22800 WF-P boards shipped to Sao Paulo with that evidence in the file.

Field Report: boutique retail all-in-one checkout refresh

BAOLONG, September 23, 2026 - Bin Yu, AndroidSBC field desk. The WF-P3601 held its dual-screen output through the full 72-hour soak, with the customer display running an independent promotion loop at its own resolution. The WF-P3601 POS Android motherboard order for Sao Paulo, Brazil cleared the burn-in station on schedule and is en route via the Santos - Shanghai CNSHA lane.

The WF-P3601 all-in-one POS terminal with receipt printer production lot includes the WF-P3601-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Brazil integrators, the ANATEL homologation with INMETRO safety conformity paperwork is bundled.

Filed by Bin Yu, AndroidSBC field desk, BAOLONG. Brazilian retailers ask for the SAT fiscal module integration note and Portuguese receipt formatting before signing the frame agreement.

WF-P3601 Application Scenarios

The WF-P3601 all-in-one POS terminal with receipt printer sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3601-A configuration is the typical build for the boutique retail all-in-one checkout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3601 drives the cashier screen while the second lane carries the customer display or the promotion wall in Sao Paulo.
• Convenience and small format stores: the WF-P3288 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3399 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P1330 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P6180 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Sao Paulo: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Sao Paulo Buyers

AndroidSBC runs three commercial tracks on the WF-P family, and Sao Paulo partners usually start on one and move to another as volume builds.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

The Sao Paulo partner keeps the commercial relationship; AndroidSBC keeps the factory discipline. That division is what makes the tracks work at volume.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support an all-in-one POS terminal with receipt printer?

Answer: Supported. all-in-one POS terminal with receipt printer is part of the standard WF-P configuration set, and the board ships to Sao Paulo with the drivers and the firmware baseline already matched.

Which silicon tiers are available in the WF-P family for Brazil buyers?

Answer: The family covers eight platforms from the RK3576 octa-core tier down to the A133 entry tier. The RK3568 board in this configuration is supported for seven years from release.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: One board handles all four. The driver SDK ships in the carton covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC, RFID, magnetic stripe, IC card, PIN pad and fingerprint reader.

What is the minimum order quantity and the sample lead time for Brazil?

Answer: Samples ship in 1-3 days and the sample MOQ is a single board. Volume production runs on a 15-30 day lead against the frame agreement, and the price list covers tiered volume breaks.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes - custom ROM, boot logo, boot animation, pre-installed applications and UI work are all available, and the customised image becomes the reference build for later lots.

How are firmware updates delivered to a Brazil estate after deployment?

Answer: Staged OTA with rollback ships with the board. The Brazil partner controls the wave size and the timing, and the watchdog recovers a lane that fails mid-update.

What shipping terms does AndroidSBC support for Brazil orders?

Answer: FOB Shenzhen, CIF and EXW terms are all supported, with export customs clearance handled at the factory. The Sao Paulo partner chooses the Incoterm that matches its broker arrangement.

What happens if a board fails in the field in Brazil?

Answer: Every unit is serialised against its test record. A Brazil field failure is traced, the root cause is confirmed on the bench at Longgang, and the replacement ships against the frozen BOM.

Contact AndroidSBC: Start Your WF-P3601 Sourcing Conversation

For the WF-P POS Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Sao Paulo integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Sao Paulo and Brazil buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.