POS Motherboard 16GB eMMC for Fuel Forecourt Cabinet, WF-P3600, AndroidSBC, Sao Paulo

TL;DR: POS Motherboard 16GB eMMC for Fuel Forecourt Cabinet

AndroidSBC peripheral desk: printer, scanner, cash drawer and payment reader driver SDK declared production-ready serving Sao Paulo, Brazil. The WF-P3600 POS Android motherboard spans the dual-screen cash register with printer and cash drawer and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, dual LVDS output at 1080p plus 60Hz, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Sao Paulo and Brazil importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-model WF-P POS Android motherboard family at the Longgang source factory in Shenzhen. The line spans entry single-screen counters through AI face payment terminals and industrial outdoor payment cabinets, so a Sao Paulo integrator can qualify one board family and then move between tiers without re-writing the peripheral layer or re-cutting the enclosure. The AndroidSBC engineering desk keeps a reference image per silicon tier, so a Brazil partner developing against the RK3576 board is testing against the same build that ships in volume, not a one-off sample image.

WF-P3600 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3600 (dual-screen cash register with printer and cash drawer) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Brazil importers sourcing the WF-P family, the WF-P3600-A variant is the typical configuration for the restaurant counter cash register rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Brazil Buyers

The thermal problem is underrated. A sealed all-in-one terminal with no fan has to hold a 7x24 counter duty cycle in a Brazil summer, and boards that pass a bench test at 25C start throttling behind a shop window.

The thermal question is handled at the board level rather than in the enclosure. The WF-P tier chosen for Sao Paulo is specified for fanless 7x24 counter duty with a hardware watchdog and a scheduled power cycle, and the burn-in record that accompanies the lot is run at the top of the temperature window rather than at 25C. On September 23, 2026 the Sao Paulo programme moved from pilot to volume: 72500 boards released against the frame agreement, shipped on the Santos - Shanghai CNSHA lane with one frozen BOM across the whole quantity.

Competitive Comparison: WF-P3600 vs Competing POS Android Boards

For Sao Paulo integrators the decision usually comes down to whether the vendor can hold a BOM, ship a driver set, and produce a test record - the four points below.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

AI is entering the lane for unglamorous reasons. Product recognition at an unattended counter, face payment at a convenience chain, and basket analytics at a supermarket all need an NPU on the board, and the dual-screen cash register with printer and cash drawer tier carries one rather than pushing the load onto the CPU.

• Entry counter tier: WF-P3600 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P6180 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P5270 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

Growth in Brazil is concentrated in the formats the WF-P family was built for: convenience, quick service, supermarket checkout and unattended payment.

Partner Success Story: Loire Comptoir Numerique (boutique retail POS integrator)

A Loire Comptoir Numerique deployment in the French specialty retail segment illustrates how the WF-P POS board family supports Sao Paulo integrators. Loire Comptoir Numerique installed 72500 WF-P boards across 45 boutique counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Loire Comptoir Numerique branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANATEL conformity, all bundled into the Shenzhen source-factory shipment.

Loire Comptoir Numerique Director of Systems for French Specialty Retail noted: Loire Comptoir Numerique needed the fiscal log retention behaviour documented for the French audit, and 72500 WF-P boards shipped to Sao Paulo with that evidence in the file.

Field Report: restaurant counter cash register rollout

SHENZHEN, September 23, 2026 - Jian Guo, AndroidSBC field desk. Each WF-P3600 board in the Brazil lot carries a serial number logged against its test record, and the peripheral validation report references those serials. The WF-P3600 POS Android motherboard order for Sao Paulo, Brazil cleared the burn-in station on schedule and is en route via the Santos - Shanghai CNSHA lane.

The WF-P3600 dual-screen cash register with printer and cash drawer production lot includes the WF-P3600-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Brazil integrators, the ANATEL homologation with INMETRO safety conformity paperwork is bundled.

Filed by Jian Guo, AndroidSBC field desk, SHENZHEN. Brazilian retailers ask for the SAT fiscal module integration note and Portuguese receipt formatting before signing the frame agreement.

WF-P3600 Application Scenarios

The WF-P3600 dual-screen cash register with printer and cash drawer sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3600-A configuration is the typical build for the restaurant counter cash register rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3600 drives the cashier screen while the second lane carries the customer display or the promotion wall in Sao Paulo.
• Convenience and small format stores: the WF-P1330 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P6180 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P5270 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P7600 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Sao Paulo: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Sao Paulo Buyers

Three tracks exist because Sao Paulo partners arrive from three directions: as a distributor with stock, as an integrator with a customer, or as a brand owner with a label.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Whether Brazil partners take distribution, integration or private label, the WF-P board underneath carries the same serialised test record.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a dual-screen cash register with printer and cash drawer?

Answer: It is. The WF-P family was specified around dual-screen cash register with printer and cash drawer, and every board in the family is validated on that use case before it leaves the Longgang factory.

Which silicon tiers are available in the WF-P family for Brazil buyers?

Answer: The WF-P family spans RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. For Brazil buyers the choice is driven by counter throughput and by whether the lane needs an NPU.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes - that is the standard counter configuration. The printer runs on RS232 or USB, the scanner on USB, and the drawer fires from the RJ11 header, all validated together before the lot ships.

What is the minimum order quantity and the sample lead time for Brazil?

Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the Sao Paulo partner can call off against a frame agreement rather than ordering in one block.

Is custom ROM, boot logo or pre-installed app development available?

Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.

How are firmware updates delivered to a Brazil estate after deployment?

Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so a Brazil estate of several hundred lanes can be updated in waves rather than all at once.

What shipping terms does AndroidSBC support for Brazil orders?

Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the Sao Paulo partner receives tracking with the lot.

What happens if a board fails in the field in Brazil?

Answer: Each board carries a serial number logged against its burn-in record, so a field failure in Brazil is traced to its production lot, and the replacement ships from the same frozen BOM.

Contact AndroidSBC: Start Your WF-P3600 Sourcing Conversation

To start a WF-P POS Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Sao Paulo integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Sao Paulo and Brazil the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.