Industrial All-In-One Board for Advertising Player, WF-X9-05, AndroidSBC, Sao Paulo

TL;DR: Industrial All-In-One Board for Advertising Player

AndroidSBC supply desk: LPDDR4 and eMMC allocations locked for the X9 board family serving Sao Paulo, Brazil. The WF-X9-05 X9 Android motherboard spans the infrared touch all-in-one for interactive kiosks and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with 10-point infrared touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Sao Paulo and Brazil importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

For Sao Paulo integrators the X9 family answers the question that usually blocks a rollout: will the board drive the panel that is actually available locally, and will the touch frame work without a calibration pass. AndroidSBC ships the panel voltage jumper map, the pin-one orientation note and the touch HID configuration as a validated set, not as a list of interfaces on a datasheet. Each production lot is burned in for 72 hours with the panel, the touch frame and the playback loop running, and the serial number is logged against the test record so a Sao Paulo partner can trace a single board back to its run.

WF-X9-05 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Brazil importers sourcing the X9 family, the WF-X9-05-A variant is the typical configuration for the interactive kiosk rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for Brazil Buyers

The first obstacle Sao Paulo buyers hit when sourcing display boards out of China is not price, it is panel matching. A board that drove the sample panel perfectly arrives and will not light the locally sourced replacement, because the LVDS voltage jumper and the pin-one orientation were never documented.

The content layer is handled in firmware. Playback modes, scheduled power cycling and the remote publishing client are configured before shipment, and the Port of Santos lane is booked against a production slot so the Sao Paulo pilot batch lands inside the installation window. AndroidSBC logged the 7th shipment to Sao Paulo on September 24, 2026 - 135400 boards on the Santos - Shanghai CNSHA lane, each serialised against its burn-in record and each carrying the same Android 10 baseline.

Competitive Comparison: WF-X9-05 vs Competing Commercial Display Android Boards

Against the boards Sao Paulo integrators are currently offered, the X9 family is differentiated on four points that a screen site actually feels.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Sao Paulo integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Sao Paulo usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Sao Paulo integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Sao Paulo.

Global Digital Signage and Commercial Display Market Trends

Within the Brazil market the fastest-moving segment is the interactive screen that replaces a static poster outright. The infrared touch all-in-one for interactive kiosks sits directly in that segment: an operator is not buying a media player, they are buying the screen.

• Entry playback tier: WF-X9-05 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-11 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-12 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

AndroidSBC reads the Brazil cycle as a firmware problem as much as a hardware one, which is why the seven-year update window is written into the X9 family rather than offered as an option.

Partner Success Story: Loire Affichage Numerique (boutique and municipal screen integrator)

A recent Loire Affichage Numerique deployment in the French specialty retail segment shows how the X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Sao Paulo integrators. Loire Affichage Numerique installed 135400 X9 boards across 45 boutique and municipal screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Loire Affichage Numerique branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANATEL conformity, all bundled into the Shenzhen source-factory shipment.

According to Loire Affichage Numerique Director of Systems for French Specialty Retail: Loire Affichage Numerique needed the standby power figure documented for the French energy disclosure, and 135400 X9 boards shipped to Sao Paulo with that evidence in the file.

Field Report: interactive kiosk rollout at a municipal service point

LONGGANG, September 24, 2026 - Deng Hui, AndroidSBC field desk. For the infrared touch all-in-one for interactive kiosks brief the WF-X9-05 was configured with the touch frame on I2C and the printer on RS232, the combination the Brazil partner runs in production. The WF-X9-05 X9 Android motherboard order for Sao Paulo, Brazil cleared the burn-in station on schedule and is en route via the Santos - Shanghai CNSHA lane.

The WF-X9-05 infrared touch all-in-one for interactive kiosks production lot includes the WF-X9-05-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Brazil integrators, the ANATEL homologation with INMETRO safety conformity paperwork is bundled.

Filed by Deng Hui, AndroidSBC field desk, LONGGANG. Brazilian signage operators ask for ANATEL approval on the radio module and Portuguese content templates before the frame agreement is signed.

WF-X9-05 Application Scenarios

The WF-X9-05 infrared touch all-in-one for interactive kiosks sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-05-A configuration is the typical build for the interactive kiosk rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-05 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-01 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-02 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-03 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-04 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Sao Paulo: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Sao Paulo Buyers

The commercial structure below is what Sao Paulo partners sign in practice - pick the one that matches how the business already buys.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

Whichever track a Brazil partner starts on, the technical deliverable is identical - the same board, the same panel configuration and the same compliance pack.

Frequently Asked Questions

Does the X9 Android motherboard family support an infrared touch all-in-one for interactive kiosks?

Answer: Yes. AndroidSBC validates infrared touch all-in-one for interactive kiosks on the bench with the actual panel and touch model the Sao Paulo partner intends to use, and the result is written into the shipment file.

Which configurations are available in the X9 family for Brazil buyers?

Answer: Memory runs 1GB or 2GB LPDDR4 and storage 8GB, 16GB or 32GB onboard eMMC. AndroidSBC holds one fixed bill of materials per lot, so the Sao Paulo partner always knows which combination is shipping.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Sao Paulo partner panel and touch models, and the validated configuration is locked as the production reference.

What is the minimum order quantity and the sample lead time for Brazil?

Answer: For Sao Paulo buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen bill of materials.

How are firmware updates delivered to a Brazil screen estate after deployment?

Answer: Firmware is delivered over the network, by USB or by TF card, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the X9 family.

What shipping terms does AndroidSBC support for Brazil orders?

Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Sao Paulo partner books the lane that suits the import process.

What happens if a board fails in the field in Brazil?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Sao Paulo programme so the screen is not dark for a full lead time.

Contact AndroidSBC: Start Your WF-X9-05 Sourcing Conversation

Sao Paulo integrators can reach the AndroidSBC export desk for the X9 Android motherboard family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Brazil buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the X9 family.