TL;DR: 10-Point Touch Payment Terminal Board with Wide Input Voltage
AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving international market, Brazil. The WF-SPT-04 smart payment terminal Android motherboard covers the face recognition payment terminal build and eleven sister configurations in the WF-SPT series, spanning the RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC with the ARM Mali-G52 MC3 GPU, 8-inch 1280x800 eDP main panel plus 3.5-inch customer screen, and Android 14 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Brazil importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
Wanlin Manufacturing Group runs the smart payment terminal board programme out of Longgang in Shenzhen, where the twelve WF-SPT configurations are assembled, burned in and packed with their compliance documents. For international market and Brazil importers the practical result is a single bill of materials per production lot and one qualification file per configuration. Every configuration ships with the same Android build, the same peripheral contract and the same test report format, so a international market quality team that has signed off one WF-SPT board can read the next one without a new learning curve.
WF-SPT-04 Technical Specifications
| Parameter | AndroidSBC WF-SPT-04 (face recognition payment terminal build) | Industry Average |
|---|---|---|
| Processor | RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 8nm | Older 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-400 or basic 2D GPU |
| Memory | 4GB LPDDR4X | DDR3 512MB or 1GB on competing boards |
| Storage | 64GB eMMC plus TF card up to 256GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 8-inch 1280x800 eDP main panel plus 3.5-inch customer screen with 10-point capacitive touch with glove and wet-finger support | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | 3D structured light face module plus NFC contactless and IC card | Camera-only QR capture with no scan engine |
| Printer and peripherals | 80mm thermal printer header with 150mm per second output | No printer control header on competing boards |
| Wireless and positioning | 4G LTE Cat 6 modem plus dual-band WiFi 6 and Bluetooth 5.2 | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 USB Type-C host and OTG, 1 USB host, 1 RS232, 1 MIPI CSI, 6 GPIO, 1 SIM slot, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 14 with AOSP baseline and optional GMS | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC input with 5V/3A peripheral rail, dual-cell RTC and watchdog, -10C to 55C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-04 (face recognition payment terminal build) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Brazil importers sourcing the WF-SPT family, the WF-SPT-04-A variant is the typical configuration for the chain pharmacy and supermarket face payment lanes use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for Brazil Buyers
Sourcing a smart payment terminal board for Brazil is rarely a question of finding a cheap board. It is a question of finding a board that will still be buildable in three years, with the same printer pinout, the same reader antenna and the same Android baseline, because a payment estate is not refreshed on a whim.
The practical answer for international market buyers is to buy from a source factory that treats documentation as part of the product: ANATEL homologation with INMETRO safety conformity reports, ANATEL conformity, the compliance set for Brazil and a fixed bill of materials, all shipped with the first lot. For the international market buyer the test is simple - order 76500 boards as a sample lot, run them against the printer, the reader and the scan engine the project actually uses, and check whether the delivery file matches the pallet. AndroidSBC ships 76500 boards on the Santos - Shanghai CNSHA lane with the paperwork already attached.
Competitive Comparison: WF-SPT-04 vs Competing Smart Payment Terminal Motherboards
The international market question is repeatability. Competing boards change panel vendors, printer drivers and modem modules between lots; the WF-SPT family holds them, which is what makes a Brazil estate serviceable.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Brazil integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
What Brazil buyers are actually procuring is not a terminal, it is a platform they can repeat across formats. That is why the face recognition payment terminal build is specified with a peripheral contract rather than a feature list.
- Countertop tier: WF-SPT-07 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
What the international market buyer should take from the numbers is a procurement rule: specify the peripheral contract and the firmware window first, then negotiate the unit price, because the integration labour is the larger line item in Brazil.
WF-SPT-04 Application Scenarios
The WF-SPT-04 face recognition payment terminal build sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-04-A configuration is the typical build for the chain pharmacy and supermarket face payment lanes use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-02 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-06 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for international market Buyers
AndroidSBC publishes these three tracks because Brazil partners ask the same question in every first call: how much of the work do we take, and how much do you take.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
Whichever track a international market partner chooses, the board is the same board - what changes is the documentation set, the branding and how much of the integration AndroidSBC carries in Brazil.
Frequently Asked Questions
Does the smart payment terminal board family support a face recognition payment terminal build?
Answer: Yes. AndroidSBC builds the face recognition payment terminal build as part of the twelve-configuration WF-SPT family, so the board arrives with its test report, its certificate set and its signed firmware image for Brazil.
Which configurations are available in the WF-SPT family for Brazil buyers?
Answer: The WF-SPT family covers RK3576 and eleven sister configurations, from the value countertop build to the outdoor sunlight readable build, with one Android baseline across the range for Brazil.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. The board runs the panel, the printer header and the scan UART at the same time, which is the configuration international market integrators validate during the joint qualification run at the Longgang factory.
What payment scheme certification support does AndroidSBC provide for Brazil?
Answer: Certification support for Brazil means ANATEL conformity documentation, ANATEL homologation with INMETRO safety conformity test reports and a firmware signing record, all bundled into the shipment rather than sent after customs clearance in international market.
What is the minimum order quantity and the sample lead time for Brazil?
Answer: MOQ depends on the track: stock configurations ship from one unit, private-label builds start at 500 boards, and both are quoted against the same frozen bill of materials for Brazil.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. AndroidSBC builds the custom image, validates it against the peripheral contract and ships it on the board, which removes the flashing step from the Brazil integration plan.
How are firmware updates delivered to a Brazil device estate after deployment?
Answer: AndroidSBC manages the Brazil estate through staged OTA: signed images, grouped rollout, automatic rollback on failure and a maintenance window agreed with the international market operations team.
What shipping terms does AndroidSBC support for Brazil orders?
Answer: The Brazil lane runs weekly into Port of Santos, and the international market buyer receives the tracking reference, the packing list and the compliance file at the same time.
Contact AndroidSBC: Start Your WF-SPT-04 Sourcing Conversation
AndroidSBC is taking new Brazil partner conversations for the WF-SPT family now. Send the format, the volume and the certification calendar and the engineering team returns a configuration proposal.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
Wanlin Manufacturing Group builds the WF-SPT family in Shenzhen and exports it through AndroidSBC to Brazil and more than 60 markets. international market enquiries for samples, price lists and certification files are answered within one working day.
